Fermer

• Fabricant:
  Vermeer
• Modèle:
  V4150A

Digging Depth: 0"-60" (0cm-152cm)
Digging Width: 5"-16" (13cm-41cm)
Ground Drive: Hydrostatic

General
Weight: 3950 lb (1792 kg) (power unit only)
Length: 93.75" (238.1 cm)
Width: 63" (160 cm)
Tread width: 50.5" (128.3 cm)
Wheelbase: 55" (140 cm)
Front axle oscillation: 13° each direction;
10° w/ Dana 44
Height: 93.25" (236.9 cm) (including roll bar)
Outside turning diameter w/ rigid rear axle:
26' (7.9 m)
Outside turning diameter w/ rear-steer axle:
18.5' (5.6 m)
Ground clearance: 7" (18 cm); 8.75" (22.2 cm)
w/ planetary axles
Backfill blade angle of approach: 2

Engine
Model: F3L1011 F Deutz Diesel
Number of cylinders: 3
Displacement: 125 cu in (2048 cc)
Torque: 89 ft-lb (120 Nm) @ 3300 RPM
Max. no-load RPM: 3150 RPM
Max. gross hp: 45.3 hp (33.8 kw) @
3300 RPM
Net flywheel hp: 41.6 hp (31.0 kw) @
3000 RPM
Fuel tank capacity: 13.5 gal (51.1 L)
Fuel consumption: 2.03 gph (7.7 L/min)
Cooling: Air
Electrical system: 12-volt
Battery: 660 CCA, 165 min. reserve; optional
dual battery, 1150 CCA, 260 min. reserve
Air cleaner: Dry-type
Oil filter: Full-flow
Cold-start aid: Hydraulic bypass and/or
ether assist

Hydraulic System
Auxiliary pump displacement: .98 cu in
(16.1 cc) / rev.
Auxiliary gallonage: 12.7 gpm (48.1 L/min) @
3000 RPM
Auxiliary pump relief setting: 2500 psi
(172 bar)
Ground-drive pump displacement: 2.8 cu in
(45.9 cc) / rev.
Ground-drive gallonage: 36 gpm (136 L/min)
Ground-drive relief setting: 3625 psi (250 bar)
Trencher pump displacement: 2.8 cu in
(45.9 cc) / rev.
Trencher pump gallonage: 36 gpm
(136 L/min) @ 3000 RPM
Trencher pump relief setting: 4060 psi
(280 bar)
Oil tank capacity: 17 gal (64 L)
Oil system capacity: 20 gal (76 L)
Oil type: Vermeer HyPower 68 or equivalent
Oil cooler: Radiator-type

Gearbox
Single speed: 0 mph – 3.5 mph
(0 km/h – 5.6 km/h)
Optional two-speed: Low range —
0 fpm – 54 fpm (0 m/min – 16.5 m/min);
high range — 0 mph – 4.8 mph
(0 km/h – 7.7 km/h)

Ground-Drive
Front axles:
Dana 44 w/o LTD slip,
Dana 60 w/o LTD slip,
Dana 60 w/ LTD slip,
Dana 70 w/o LTD slip,
Dana 70 w/ LTD slip,
planetary w/ LTD slip
Rear axles:
Dana 60 rigid SF w/ LTD slip,
Dana 60 steer w/o LTD slip,
Dana 60 steer w/ LTD slip,
Dana 70 rigid w/ LTD slip,
Dana 70 steer w/o LTD slip,
Dana 70 steer w/ LTD slip,
planetary steer w/ LTD slip

Brakes
Park: Hand-set
Service brake: Hydrostatic system
(single speed)
Speed control: Forward, reverse (foot-pedaloperated
w/ hand control override)
Tire size: 29 x 12.5 – 15, 4-ply;
31 x 15.5 – 15, 8-ply

Features & Benefits
Feature: Forward/Reverse Ground Drive Foot Pedal
Benefit: Operators hands are freed, making this machine productive and easy to operate.

Feature: Grouped controls on the right side of the machine
Benefit: Convenient control location for ease of use while operating attachment.

Feature: Optional Backhoe Remote Controls
Benefit: The operator is able to reposition machine without leaving the backhoe operator station.

Feature: Cutters are supported by bolts through both side plates of the chain assembly.
Wear rings on end idler
Benefit: Added support lowers repair and maintenance costs.