Cette page a été traduite avec Google Traduction
Bibliothèque de spécifications d'équipement
Informations de base sur le modèle
-
Fabricant:Vermeer
-
Modèle:D10x15
-
Taille de plate-forme:0 - 10,000 lbs Pullback
Voir les fabricants Voir les modèles
Caractéristiques
Information additionnelle
Oil-well drilling installation
Length: 478 cm
Width: 91 - 124 cm
with linkage change mechanism: 107 - 124 cm
Height (in operating position): 219.7 cm
Operating weight
with linkage box: 3447 kg
with linkage box and
autom. Linkage change-over switch: 3946 kg
hydr. Tightening device: Yes
Driving speed: 2,4 km/h
integrated drill pipes: Yes
autom. Linkage change-over switch: (optionally)
stationary anchoring system: Yes
Work slip thrower: Yes
Operational data
max. Number of revolutions: 180 U/min.
max. Torque: 2031 Nm
effect. Feed motion u. Pull-back power: 4536 kg
electrical. System: 12 V
Suspension system
Option 1:
max. Mechanical handling capacity: 51.10 l/min.
Option 2:
Use of other high pressure suspension plants
possible.
Drive
Engine: Perkins®
Achievement: 50 PS/37 KW
max. Revolutions: 3000 U/min.
Drill pipes
one-piece forged: Yes
Single length: 3 m
Diameter: 42 mm
Bending radius: 29.1 m
Weight: 17 kg
Drilling parameter
min. Hole diameter: 80 mm
The drilling head works with all well-known
Detection systems.
max. Drilling length varies *)
*) Dependent on ground condition,
Hole diameter and weight too
shifting product.
Amount of filling
Hydraulic oil: 87 l
Engine oil inclusive. Filter 8.2 l
Fuel: 64 l
---------------------
DIMENSIONS AND WEIGHTS
Weight: 8980 lbs (4073.3 kg)
ENGINE
Make and Model: Perkins
Maximum Engine RPM: 3000 rpm
Gross Horsepower: 50 hp (37.3 kw)
Net Horsepower: 47 hp (35.1 kw)
OPERATIONAL
Thrust: 10000 lbs (4535.9 kg)
Pullback: 10000 lbs (4535.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 90 ft/min (27.4 m/min)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 3 " (7.6 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes- optional
Drill Rack Angle: 16 deg
FLUID CAPACITIES
Fuel Tank: 17 gal (64.4 L)
Engine Crankcase with Filter: 8.7 qt (8.2 L)
Hydraulic Tank: 23 gal (87.1 L)
Drilling Fluid System Option One
Maximum Flow: 13.5 gpm (51.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 55 gal (208.2 L)
FEATURES
Breakout System: Hydraulic - open top
Stakedown System: Yes - stationary
Length: 478 cm
Width: 91 - 124 cm
with linkage change mechanism: 107 - 124 cm
Height (in operating position): 219.7 cm
Operating weight
with linkage box: 3447 kg
with linkage box and
autom. Linkage change-over switch: 3946 kg
hydr. Tightening device: Yes
Driving speed: 2,4 km/h
integrated drill pipes: Yes
autom. Linkage change-over switch: (optionally)
stationary anchoring system: Yes
Work slip thrower: Yes
Operational data
max. Number of revolutions: 180 U/min.
max. Torque: 2031 Nm
effect. Feed motion u. Pull-back power: 4536 kg
electrical. System: 12 V
Suspension system
Option 1:
max. Mechanical handling capacity: 51.10 l/min.
Option 2:
Use of other high pressure suspension plants
possible.
Drive
Engine: Perkins®
Achievement: 50 PS/37 KW
max. Revolutions: 3000 U/min.
Drill pipes
one-piece forged: Yes
Single length: 3 m
Diameter: 42 mm
Bending radius: 29.1 m
Weight: 17 kg
Drilling parameter
min. Hole diameter: 80 mm
The drilling head works with all well-known
Detection systems.
max. Drilling length varies *)
*) Dependent on ground condition,
Hole diameter and weight too
shifting product.
Amount of filling
Hydraulic oil: 87 l
Engine oil inclusive. Filter 8.2 l
Fuel: 64 l
---------------------
DIMENSIONS AND WEIGHTS
Weight: 8980 lbs (4073.3 kg)
ENGINE
Make and Model: Perkins
Maximum Engine RPM: 3000 rpm
Gross Horsepower: 50 hp (37.3 kw)
Net Horsepower: 47 hp (35.1 kw)
OPERATIONAL
Thrust: 10000 lbs (4535.9 kg)
Pullback: 10000 lbs (4535.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 90 ft/min (27.4 m/min)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 3 " (7.6 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes- optional
Drill Rack Angle: 16 deg
FLUID CAPACITIES
Fuel Tank: 17 gal (64.4 L)
Engine Crankcase with Filter: 8.7 qt (8.2 L)
Hydraulic Tank: 23 gal (87.1 L)
Drilling Fluid System Option One
Maximum Flow: 13.5 gpm (51.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 55 gal (208.2 L)
FEATURES
Breakout System: Hydraulic - open top
Stakedown System: Yes - stationary
Cette information est fournie à des fins d'information seulement. HDD Broker LLC ne peut garantir l'exactitude ou l'exhaustivité de ces informations. Cette information est sujette à changement par le fabricant. Certaines spécifications peuvent varier selon l'année du modèle.